.webp){kind=icon}
.svg){kind=icon}
The GT series offers the right solution for your measurement task: for small-module gears and rotationally symmetrical components, e.g. from the automotive industry, to toothed workpieces and shafts, which are used, for example, in commercial vehicles, railway transmissions or construction and agricultural machinery, to the measurement of marine transmissions.
Massive & robust granite base | All axles protected against oil & dust | Almost wear-free construction | Modular system - easy to adjust
Optimized ergonomics | Small & compact floor space | Flexible and space-optimized control panel | Simple multifunctional handheld control panel
Air bearings in all axes | Base plate & linear axis guides made of granite | Proven standardized control technology
SP600 tactile scanning sensors, optional SP25 or SP80 | Optional WENZEL optical sensors | Optional WENZEL roughness sensors
-min.avif)
For easy mounting of shafts, the gearing measuring device can be optionally equipped with a counterholder. Diameters of up to 1,200 mm can be measured using the counter holder. Components whose measurement does not require a counterholder can even be measured precisely up to a diameter of 1,600 mm. WENZEL thus supports a wide range of industries and provides solutions for the automotive and energy industries, conveyor technology, agriculture, the aviation industry and mechanical and plant engineering.
The GT 300 was developed specifically for the measurement and analysis of gears with small modules and rotationally symmetrical components in the automotive industry. Optionally, the GT 300 can be equipped with a counter holder for measurements between tips.
The GT 450 gearing measuring device is typically used in aviation, automotive and their supplier industries. It enables precise analysis of gears and rotationally symmetrical workpieces up to a diameter of 450 mm. Equipped with a counterholder, shafts with a maximum length of 650, 900 or 1200 mm in a measurement range of 650 or 800 mm can be measured on this gearing measuring device.
Due to its maximum measurable diameter of 650 mm, the GT 650 is particularly suitable for measuring toothed components and shafts, which are used, for example, in commercial vehicles, railway transmissions or construction and agricultural machinery. The optional counterholder makes it possible to measure waves up to 900 or 1200 mm in length. In the standard version of this gear measuring device, wheel widths of up to 650 or even 800 mm can be measured as an option.
If engine components in the aviation industry or smaller marine transmissions need to be measured reliably, the GT 900 is the ideal gearing measurement device. It is equipped with a movable counterholder and thus makes it easy to load the measuring device. Measurement objects with a maximum diameter of 900 mm can be measured between the tips. The optional counterholder makes it possible to measure waves up to 900, 1,200 or 1,600 mm in length. The GT of this size is actively damped as standard. This also ensures that large components can be measured with high precision close to production.
Large components in the field of mechanical and plant engineering also require a corresponding gearing measuring device, the GT 1200. For easy loading of the gear measuring device with large components, it is equipped with a movable counterholder. Diameters of up to 1,200 mm can be measured using the counter holder. The optional counterholder makes it possible to measure waves of up to 1200 or 1600 mm in length. As with all machines in the GT series, the GT 1200 does not require a separate foundation. Active vibration damping absorbs vibrations from the environment and thus ensures reliable measurement processes.
