.webp){kind=icon}
.svg){kind=icon}
Visit WENZEL at Control in Stuttgart in Hall 5 | Booth 5101.
Get exclusive insights into our wide range of services in the areas Coordinate and gear measurement technology as well as in the industrial computed tomography, for measurement room And the direct manufacturing environment — gladly too fully automated.
We also present many new software productsWhich the waiter more of our machines relieve, like that World Cup | Shopfloor Interface or the increase productivity Like the WM | Alternator, with which you can get from CAD models with PMI information automates measurement programs can generate.
Make an appointment with our measurement technology specialists and get a free day ticket!
We are looking forward to meeting you in person in Stuttgart!
Faster and more production-oriented measurement — Faster measurement in time with production is often more important than further increases in accuracy. Here, we are already operating in areas smaller than 1 µm.
Sustainable production is inextricably linked to quality assurance. Our modern measurement methods ensure high accuracy, higher productivity and fewer faulty parts. This significantly helps manufacturing companies to avoid waste and waste of raw materials.
automation It has been a trend for years, but it is becoming more and more acute Shortage of skilled workers will continue to strengthen. Our machines and software products are designed in such a way that they can be seamlessly integrated into partial or full automation.
On the Software page The theme wins automatic measurement program generation (PMI) in importance. However, if companies then discover that the requirements in construction, etc. are often not yet met, then it is usually pushed back into the future. It is also important that the measuring machines easy and intuitive to make it operable. Here, great attention is paid to measurement software, which should provide the operator with the best possible support.
The stronger networking of measuring machines on the shop floor is ensured by Standardization based on OPC AND OTHERS and the Closed Loop supported between measuring and processing machines.
On the customer side, we notice that we are becoming stronger than full-service provider are inquired, also due to the Shortage of skilled workers. We not only supply the machine and support for automation, but more and more often, we create the measurement programs and hand over the measurement solutions during operation.
Measurement software
- World Cup | Quartis Release 2023-2
- OPC UA dashboard for monitoring and controlling machine deployments
- Automation interface for easy connection of our machines with a production cell
GT 300 gearing meter...
with significant, functional innovations. The GT 300, the smallest solution from our product group of gear measuring machines together with our WM | Gear and WM | Gear Analyzer gearing software family.
Industrial computed tomography...
for measurement tasks including automation. With the eXact S, M, L and U models, we have a very wide range of products. See the eXact S and eXact L live at the trade fair.
EcoLine series coordinate measuring machines (CMMs)
We would be happy to present our EcoLine concept to you. We have thus created a new regenerative business model and save up to 50% of CO2 consumption compared to manufacturing a new coordinate measuring machine.
LH 108 with round table
Get accurate measurement results quickly and easily with top-class 3D portal measuring devices extended with a rotary table.
LH 87 with REVO
The production cycle time is the requirement for measurement technology; this can be achieved very well with the flexible 5-axis REVO measuring head or the use of our optical sensors.
SF 87 with Automation
The shop floor CMM for measurement in the manufacturing environment. In relation to the floor space, the machine offers an optimal measurement volume for this design. Powerful probes and optical sensors ensure a further increase in efficiency. We will show the solution with automatic assembly.
Mobile measurement
WM | MMA measuring arms record the complete geometry of a component and are very flexible due to many degrees of freedom and small dimensions and, above all, can be used on the go. The mScan mobile handheld 3D scanner enables fast and reliable measurements with easy operation. Both measuring arms as well handheld scanner are extremely useful for a wide range of applications, such as quality assurance, reverse engineering, and production monitoring.
News from WENZEL Computer Tomography & Gear Measurement Technology and...
... how to put gears through their paces!
A presentation by Dr. Uwe Hilpert and Stefan Staab.
Every day from 9 to 12 May 2023 | 11:00.
Learn more about our versatile and comprehensive measurement solutions in the area of industrial computed tomography and Gear measurement technology And how this goes to complete testing of a gear can be used.
◾ GD&T measurements
◾ Gear measurements
◾ Material analysis
◾ Wall thickness analysis
◾ CAD comparison
◾ Reverse Engineering
◾ Shrinkage and distortion
◾ Standard automation interface
Renishaw: Hall 9 Booth 9101
SF1210 with REVO
With Renishaw Let's show our KMG SF 1210, optimized for manufacturing requirements, with the REVO. The production cycle time is the requirement for measurement technology; this can be achieved very well with a flexible 5-axis measuring head or the use of optical sensors.
VDMA: Hall 5, Booth 5508
OPC UA — A common language for all machines
As an open interface standard, OPC AND OTHERS a key requirement for the successful introduction of Industry 4.0 into production. OPC UA ensures the interoperability of machines and systems, which can be linked and redesigned as required via plug & work — platform-independent and cross-manufacturer. In the VDMA Measurement and Testing Technology working group, we are currently working on the basic standard for better communication and interoperability in measurement technology.
Creon: Hall 3, Booth 3304
LH 65 with optical sensors
Our innovative partnership with Creon In the area of portable measurement solutions and 3D laser scanning, we help us to offer our customers the best possible solution on the market.
Pantec: Hall 3, stand 3425
SF 55 Shopfloor KMG
The robust SF 55 is our smallest coordinate measuring machine for the shop floor sector, which is characterized, among other things, by high efficiency and is suitable for measuring both series and individual individual parts.
Set new standards together!
Become part of an innovative company that has remained young despite 50 years of tradition.
.webp){kind=small}
