WM | Quartis R2023-2

World Cup | Quartis R2023-2 brings numerous innovations for various applications and areas of application.

‍

WM | Quartis R2023-2 includes other useful functions for Standard-compliant tolerance evaluation upon ISO GPS and ASME Y14.5. They value margins select two parallel lines using either the specification operators (LP, GG, GC, GN, GX or E). Die position tolerance one Sample tolerance supports further use cases. Re-evaluate also the diameters A whole groupe from circles or cylinders in one step. You also value user-defined characteristics Now also available with a one-sided (zero-limited) tolerance zone.

‍

WM | Quartis R2023-2 shows in the 3D graphics those mounted on the coordinate measuring machine components, such as stylus, reference ball, mounting plates, stop angles or clamping devices. Thanks to the extended graphical display, they program and check their measurement processes even more efficiently.

‍

WM | Quartis R2023-2 includes several improvements for simplified and better measurements. You define and scan any 3D spatial curves on your components. When scanning surface lines on rotationally symmetrical elements, such as cylinders, cones or spheres, the setting”Consistent scan direction” for more stable measurement results. With REVO RUP1 ultrasonic probe Perform thickness measurements through previously inaccessible workpieces.

‍

WM | Quartis R2023-2 includes additional functions for optical trade fairs and Evaluate. You measure directly on polygon meshes And can they therefore with a computed tomography Evaluate recorded actual data (CT) using length measurement technology. You can easily set up point clouds or polygon meshes with the new fully automated Best-fit orientationoff. The optimized triangulation The CAD models provide more meaningful name/actual comparisons. Such colored 3D comparisons Now you can also generate directly from point clouds.

‍

WM | Quartis R2023-2 also offers updated CAD interfaces other useful improvements and enhancements.

‍

‍

Benefit from the following new features, among others:

Standard-compliant tolerance evaluations in accordance with ISO GPS and ASME

• Evaluate the distance between two parallel lines using specification operators (LP, GG, GC, GN, GX, or E)
• Evaluate further cases of position tolerance with pattern tolerance
• Evaluate the diameter of an element group
• Evaluate user-defined characteristic with zero-limited tolerance zone

‍

Graphical display of components mounted on the CMM

• Graphic display of the components mounted on the coordinate measuring machine, such as reference ball, stylus change systems, mounting plates, stop angles, vises, clamping devices, etc.

‍

Simplified and better measurement

• Define any spatial curves and scan them as 3D curves
• Consistent scan direction when measuring with the “surface lines” distribution method
• Thickness measurement with Renishaw REVO RUP1 ultrasonic probe

‍

Visually measure and evaluate

• Measurement on polygon networks for direct length-measurement evaluation of CT data
• Optimized triangulation of CAD models
• Fine alignment (best fit) of polygon meshes and point clouds
• Colored 3D comparisons of point clouds with CAD nominal data
• The pre- and post-run of optical scan paths can be adjusted separately
• Automatically calculated optical scan paths can be individually adjusted

‍

More new features

• New and adapted CAD interfaces
• Time-optimized REVO RSP3 scanning probe
• Windows screen scaling supported for high-resolution displays (high-DPI)
• Position the measuring device: save and reload positions
• Scanning with turntable: Start/exit route supported
• Drag and drop to open and import files
• Optimized mouse wheel zoom in the graphics window
• Call subroutines parameterized

‍